The use of wire cup brush

- 2022-07-18-

Wire cup brush, especially wire rollers, are usually used in steel or aluminum surface treatment plants. A series of stainless steel wire cupo brushes are installed on the fully automatic high speed brush polishing machine (brush polishing machine). The steel wire cup brush roller rotates at high speed on the upper and lower surface of the strip to brush the oxide sheet in the opposite direction to the rolling movement. Brush off the oxide sheet with closed circulating cooling water flushing system. Generally, the use thickness of wire coil is 1.09-6.35mm, and the renewal cycle of wire brush is once for every 20,000 T sheet or 40,000 T steel coil.

Stainless steel super fine elastic wire brush is dedicated to cleaning ceramic roller, this is because the hardness of ceramics is much higher than the hardness of steel wire, steel wire cup brush will not damage the ceramic layer of roller surface. Superfine elastic copper wire cup brush is used for cleaning chrome-plated metal mesh roller, gravure plate roller common necessary cleaning tools, with the use of cleaning agent better effect.

Common specifications 6*14 or 5*14 holes, steel wire material 304 stainless steel wire or ordinary steel wire can be. Each hole is usually implanted with 5 roots folded in half, and the length of steel wire protruding is about 20mm. Brush made of ordinary steel wire is easy to rust, without use, compared with 304 stainless steel wire made of wood handle wire brush quality is too much.

Steel wire pipe brush is generally used in industrial pipelines, mechanical screw hole cleaning rust removal, polishing cleaning effect, pipe brush process using steel wire or stainless steel wire sandwiched in two strands of iron wire or four strands of iron wire with mechanical torsion.

Wire cup brush